Power Down Plunge

• Pause the chiller by pressing the pause button on the UI
  • ⚠️ Powering down the Plunge while it's in a cooling cycle can damage the chiller.
• Press the test button on the GFCI outlet to power down the Plunge.
• Unplug the GFCI outlet from the outlet.

🚨 Important: Do not power down the Plunge before pausing the chiller.

Remove Right Chiller Vent

• Locate the right-side chiller vent on the tub.
• Pull up on the plastic tab and then pull outward to remove the vent cover.
• Set the vent aside to expose the electrical box.

Vacuum Back of Condenser Fan

• Using a bristle brush head reach through the right side vent and vacuum all the lint, dust, and dirt on the back of the condenser fan.

NOTE: Ensure the condenser fan is thoroughly cleaned of all debris. Not clearing debris can lead to functionality issues and even a failed chiller. 

Install Chiller Vent

• Align the right-side chiller vent back onto the frame.
• Press it into place until the tab clicks and the vent is fully secured.