Tubs Compatible With These Instructions:

• Plunge All-In 
• Plunge All-In Commercial

For instructions on how to change out the water on a Plunge All-In Commercial Max, please go here. 

Drain and Refill Your Plunge

DO NOT drain your Plunge while your Plunge is paused. You must power down the Plunge when draining and refilling. The chiller can be damaged if it unpauses while empty and this will void your warranty.

1. Pause the Plunge and wait for the jets to turn off.
2. Turn off the Plunge by unplugging the power cord or pressing the “test” button.
3. Remove the ventilation screen on the side opposite of the filter housing. 
4. Remove the cap from the spigot
5. Attach a garden hose to the spigot 
6. Turn the spigot on and the water should flow out
7. Replace the cap after draining
8. Take this time while the Plunge is empty to clean the drain strainers by following these instructions.
9. Refill the Plunge and follow the initial setup instructions

Frequency Requirements:

• Plunge All-In Commercial - Every one month at minimum

Video Instruction: